The Linksys E4200 v2 Maximum Performance Dual-Band N900 router is a major upgrade to the original Cisco Linksys E4200 that was released in January. Though it looks exactly the same on the outside, on the inside the E4200 v2 boasts 450Mbps on both 5GHz and 2.4GHz bands (as opposed to just the 5GHz band of the original) and a faster processor for network storage when coupled with an USB external hard drive, and can host up to 50 guest clients (up from the original 10). Other than that, the two routers are essentially the same in terms of features. ... Expand full review
The Linksys E4200 v2 Maximum Performance Dual-Band N900 router is a major upgrade to the original Cisco Linksys E4200 that was released in January. Though it looks exactly the same on the outside, on the inside the E4200 v2 boasts 450Mbps on both 5GHz and 2.4GHz bands (as opposed to just the 5GHz band of the original) and a faster processor for network storage when coupled with an USB external hard drive, and can host up to 50 guest clients (up from the original 10). Other than that, the two routers are essentially the same in terms of features.
That said, the new E4200 v2 offers all that the original has to give and more, enough to justify its price tag of $199, compared with the original's street price of around $150. If you're looking for a top-notch router with no compromises, especially one that also offers an easy and viable network storage option when coupled with an external hard drive, the Cisco Linksys 4200 v2 will make an excellent investment.
Those who don't care much about the 450Mbps speed should also consider the original Linksys E4200, the Netgear WNDR3800, or the Asus RT-N56U.
Design and ease of use
Like the rest of the Linksys E-Series routers, the Linksys E4200 v2 looks more like an expensive jewelry gift box than a router. With its flat shape and internal-antenna design, the router is more compact than its peers. This means you can leave it out in the open, rather than hide it, as you would most routers. The v2 also comes with a much more compact power adapter than the previous version, which is a nice touch.
The router has four LAN ports and one WAN port on the back. All are Gigabit Ethernet-capable, meaning they support throughput up to 1,000Mbps. Also on the back you'll find the push button for the Wi-Fi Protected Setup (WPS) feature, a recessed reset button, and a USB 2.0 port that can host a USB external storage device for the router's network-attached storage (NAS) function. With WPS you can add WPS-enabled clients to the wireless network with the press of a button. The USB port on the E4200 v2 supports either a USB printer or an USB external hard drive for a quick network storage solution. The router now comes with a much faster processor that runs at 1.2GHz (as opposed to the original's 480MHz), promising significantly higher storage performance.
On the front, the new E4200 forgoes the usual array of status LEDs. Instead it has just one white light, in the shape of Cisco's logo, which blinks when the router's booting up (or something is not right) and stays solid when everything is in order.
Like all routers in the E-Series, the E4200 v2 comes with Cisco Connect, software that helps novice users set up and manage the router very easily. Anyone who can use a computer mouse can get the router up and running within about 5 minutes. The software works essentially the same for all E-Series routers.
By default, the software sets up a single wireless network combining the two networks for the 2.4GHz band and 5GHz band, so that they share the same name and the same password. This is similar to how Apple sets up its AirPort Extreme. Though this makes things easier, it also means you won't be able to manually pick which band to use with dual-band clients.
With Cisco Connect you can also turn the guest network (which is available only in the 2.4GHz band) on or off, manage the parental control features, and carry out a few other tasks. The software is very limited in functionality and requires a live Internet connection to work. In order to do more with the router, such as name two separate networks for 5GHz and 2.4GHz bands, or set up the router for an isolated network that's disconnected from the Internet, you'll need to use the router's Web interface by pointing a connected computer's browser to 192.168.1.1.
Note that if you haven't used Cisco Connect, the default credential to log in to the router's Web interface is "admin" for both username and password. Once you have changed the default password, the username remains the same. If you use the Cisco software to set up the router, the password (or encryption key) for the wireless network is also the one required to log in the router's interface.
It's rather confusing to list what you can and can't do with the Cisco Connect software. The good news is, the Web interface's functionality encompasses that of Cisco Connect. For this reason, savvy users can and should skip the Cisco Connect software entirely, so they can be in complete control of the router's settings.
In the end, it's best to use the Cisco Connect software if you are a novice user, or the Web interface if you are a savvy user, but not to use both, to avoid instances where one would cancel out the other.
Starting with the E4200 v2, Cisco has also released a mobile application for Android- and OS-based devices that enables users to monitor the router, or any other router in the E-Series, right from a mobile device. For now you can only do that if the device is connected to the router's wireless local network, and not from anywhere via the Internet.
Features
The Linksys E4200 v2 is a true dual-band router, meaning it has two separate access points--one for the 2.4GHz band and the other for the 5GHz band--that can work simultaneously. It's also the first from Cisco to offer the 450Mbps (or 3-by-3) configuration on both bands. The previous version only supports this on the 5GHz band. Others routers I've reviewed that offer dual-band concurrent 450Mbps include the Trendnet TEW-692GR and the Netgear WNDR4500. To take advantage of this new speed, the clients have to also support the same 3-by-3 Wi-Fi standard, which more and more of them do.
In addition to the networks for the two bands, the E4200 v2 offers another wireless network on the 2.4GHz band for guests. Guest networking is great for when you want to share the Internet with others without giving them access to your local resources, such as files or printers. The E4200 v2's guest networking feature allows up to 50 clients, which is a big improvement compared with the original E4200's maximum of 10. However, you'll need to use the Web interface to set this higher number, as Cisco Connect allows a maximum of 10 clients. This is likely because 10 clients are enough for a home and only home users would use the software rather than the Web interface to set up the router.
Regardless of which option you use to manage the router, you can't name the router's guest network arbitrarily. The guest network's name will always be your main network's name plus a "-guest" suffix. This means guests will always know what your main network's name is and that, well, they are guests.
The E4200 has simple and straightforward support for network storage, including features such as sharing the content of a USB external hard drive (formatted using either NTFS or FAT32), with user account restriction. By default the admin account has full access and can create more user accounts. It also has a built-in UPnP media server with which you can stream digital content to other UPnP-compliant devices, such as set-top boxes, network media players, and game consoles.
Hide Review Next pageView the original article here
Computer
No comments:
Post a Comment